0 ITEMS  ♦  $0.00

Torch Pkg, W/3.5" Torch & 25' Vinyl Cables

Click to see larger version of Torch Pkg, W/3.5\" Torch & 25\' Vinyl Cables

[Part# WP-125M-25] [Vendor's Part# WP-125M-25]

$251.38

  Qty.
Torch Pkg, W/3.5\" Torch & 25\' Vinyl Cables

Product Description


WP-125M-25

Standard Micro TIG Torch Package (Medium Torch Body).
125 Amp Water-Cooled. 3.5" (88.9mm) Long Torch Body with 25' (7.6m) Vinyl Plastic Power, Water and Gas Hose Set. Note: 160 Amp (DCSP) Rating When Using 3/32" (2.4mm) Electrode and Quartz Nozzles. Includes 1/16" (1.6mm) 45 Degree Electrode Chuck and Gas Nozzle.


FIRST TIME USERS:

If you plan to use your Water-Cooled Micro TIG torch on a power supply with threaded stud connectors, use the U.S. Hook-up instructions. If your power supply has International DINSE connectors (see Arc-Zone.com recommended Weldcraft® QCS connectors), use the International Dinse-style Hook-up instructions.

Once the power supply connection is established, you are ready to set-up and maximize the performance of your Weldcraft® water-cooled TIG torch, before moving on to the below listed WP-125 torch specific getting started guidelines.

GETTING STARTED:

Note: This torch is a delicate instrument and should be setup carefully to ensure long parts life and high-quality welds.

Arc-Zone.com® recommends ArcTimeú high-performance cut-to-length and pre-ground tungsten electrodes to improve your micro TIG welding quality and productivity. ArcTimeú is a high-performance non-radioactive formula that runs cooler, resists contamination and maintains tip geometry longer than any tungsten on the market. Excessive heat transfer from "standard" Thoriated, Lanthanated and other type electrodes cause premature chuck and gas nozzle failure.

Tungsten Electrode Positioning/Tightening Instructions:

 

  • Tighten all but 180° straight style chucks using the inserted tungsten as a lever by rotating clockwise (see Fig. 1). Note: Take care to rotate nozzle simultaneously so as not to force tungsten against nozzle causing breakage.
  • Adjust Tungsten length so that rear of tungsten is flush with rear of chuck as shown; (Figs. 2,3, and 4) and protudes approx. 1/8" beyond the nozzle.
  • When using the P/N (125N90S) low profile 90° nozzle, the two gas lens screens that are included should be positioned inside the nozzle so that the electrode holes in the screens are aligned with the nozzle orifice. The tungsten should be inserted through the nozzle orifice, electrode holes in the screen, and then through the electrode holes in the chuck.
  • Tighten 180o straight style chucks (Fig. 5) with Weldcraft Chuck Wrench P/N (53N20). Length of tungsten (1/16" or smaller) is determined by model (length) of WP-125 torch.



Weldcraft® WP-125 -- 3.5" (88.9mm) -- Standard Length

Amperage 160 DCSP maximum, 100% duty cycle
Water-cooled body interchangeable, 45º / 90º / 180º electrode chucks
Electrode capacity .040" (1.0mm) - 3/32" (3.2mm)
Head size varies by chuck/nozzle type from 5/8" (15.8mm) to 3/4" (19.0mm) long
Torch length 3.5" (88.9mm) -- Standard
Handle diameter 3/4" (19.0mm)
Water flow 1qt./min. (0.946 L/min.)
Maximum pressure 50 psi (3.448 BAR)

Weldcraft® WP-125L -- 5" (127mm) -- Long

Amperage 160 DCSP maximum, 100% duty cycle
Water-cooled body interchangeable, 45º / 90º / 180º electrode chucks
Electrode capacity .040" (1.0mm) - 3/32" (3.2mm)
Head size varies by chuck/nozzle type from 5/8" (15.8mm) to 3/4" (19.0mm) long
Torch weight 1 oz. (28.3g)
Torch length 5" (127mm) -- Long
Handle diameter 3/4" (19.0mm)
Water flow 1qt./min. (0.946 L/min.)
Maximum pressure 50 psi (3.448 BAR)

***The WP-125M-25 Micro TIG Torch Package has been discontinued by the manufacturer.  It has been replaced by the WP-125M-25 Micro TIG Torch Package.

The Metal Mashup - Powered by Arc-Zone

Take your welding skills & tools to the next level - Join 60,000+ welders to receive the best welding application tips, new product launches, & exclusive offers straight to your inbox.