null
Arc-Zone Pro

Shield Gas Flow Test Gauge for TIG, MIG & Plasma

(6 reviews) Write a Review
SKU:
PX-50020
MPN:
50020
Minimum Purchase:
1 unit
  • Arc-Zone Pro Shield Gas Flow Test Gauge for TIG, MIG & Plasma
  • Arc-Zone Pro Shield Gas Flow Test Gauge for TIG, MIG & Plasma
$11.60

Description

Arc-Zone Pro Shield Gas Flow Test Gauge

How can you verify if your gas flow meter is accurate?
How can you verify the actual gas flow rate at the torch cup? 

Arc-Zone's Pro Series Shield Gas Flow Test Gauges make it easy to accurately measure your gas flow rates at the torch where it matters most!

This easy to use device will take the guesswork out of optimizing your welds, and

  • Lower gas usage saving you time and money!
  • Easy to measure & document flow rates – at the torch –
  • Reduce weld variations
  • Measure Argon & Co2 Flow Rates up to 25 LPM - 52 CFH - (Cubic Feet Per Hour)

To Convert to LPM (Liters per Minute) Multiply CFH x 0.72

View AllClose

Additional Information

Weld Type:
MIG
Category:
Tools
View AllClose

6 Reviews

  • 5
    Great product especially for the price eliminates…

    Posted by Anthony N. on Nov 5th 2019

    Great product especially for the price, eliminates any second guessing of gas flow

  • 5
    Inexpensive and perfect for the shop! We all know…

    Posted by Jacob V. on Jul 17th 2019

    Inexpensive and perfect for the shop! We all know not everyone treats everything the same so it’s nice to be able to double check from time to time.

  • 5
    Everyone should have one of these to assure what…

    Posted by Scott S. on Nov 19th 2018

    Everyone should have one of these to assure what your gas flow truly is.

  • 5
    This is in regards to an earlier feedback left on…

    Posted by Don Buchanan on Mar 2nd 2015

    This is in regards to an earlier feedback left on 2/20/2015 about a defective Shield Gas Tester I received from Arc-Zone. I am glad to see that Arc-Zone stepped up and sent me another tester with out my having to prove the first tester I received was defective. I've been welding professionally since about 1970, so I know how a Shield Gas Tester has to function. This has renewed my faith in Arc-Zone as a great business to work with. Thank you for your help in this matter. Don

  • 1
    No gas passage through rubber end. Would not work…

    Posted by Don Buchanan on Feb 20th 2015

    No gas passage through rubber end. Would not work when I received the tester with out reworking the rubber end by punching the right size hole inside the rubber end. Poor quality control at Arc-Zone. ^^^^^^^^^^^^^^^^^^ Hello Don, We're very sorry to hear about your troubles on the Shield Gas Flow Tester. Our Customer Care Team shipped you out a brand new Shield Gas Flow Tester at no extra charge. It's standard procedure that our Team double-check all inventory to ensure there are no product defects, but unfortunately, we missed this one! We appreciate your business and hope this makes up for the mishap. If you're satisfied with the new Shield Gas Flow Tester you receive, we would appreciate an updated review after proper testing. Please let us know if you have any questions at all Don, thank you. -The Arc-Zone Team

  • 5
    This gas tester is great to have on site. It is…

    Posted by Rosco F. on May 27th 2009

    This gas tester is great to have on site. It is quick and easy to use.

View AllClose