Washington Alloy

ER80S-B2 - Mild Steel TIG Welding Rod - 1lb. Pack

(1 review) Write a Review
MPN:
ER80SB2045
Minimum Purchase:
1 unit
$18.00 - $21.30

Description

ER80S-B2

High-Performance Mild Steel TIG Welding Rod.

AWS A5.28 Grade
Class ER80S-B2
Available Diameters .045", 1/16", 3/32" & 1/8"
Length 36" (914mm)
Weight 1 lb. Pack

Approximate number of rods per 1 lb. pack for each diameter:

  • .045" (1.14mm): 36 - 40
  • 1/16" (1.6mm): 26 - 30
  • 3/32" (2.4mm): 12 - 16
  • 1/8" (3.2mm): 8 - 10

ER80S-B2 AWS A 5.28 CLASS ER 80S-B2

ER80S-B2 is a low alloy wire used to weld 2¼% Chromium, 1% Molybdenum low alloy steels.

ER80S-B2 produces quality welds on pressure piping or boiler work.

Depending on the hardening characteristics of the base metal, pre-heating from 300°F - 350°F, control of interpass temperatures and post heating at 1,250°F - 1,350°F for 1 hour is required.

Typical applications include pressure piping in steam power generating plants, chemical and petrochemical processing equipment, and shipbuilding.

Tensile strength: 96,000 psi.

Elongation is 24%.

Charpy V-notch @ 72°F is 48 ft. lbs.

View AllClose

Additional Information

Material Type:
Mild Steel
Wire Diameter:
.045" (1.14mm)
Wire Diameter:
1/16" (1.6mm)
Wire Diameter:
3/32" (2.4mm)
Wire Diameter:
1/8" (3.2mm)
Pack Size:
1 lb. Mini Pack
View AllClose

1 Review

  • 3

    Per vendor's website…

    Posted by Graham Woade on May 7th 2013

    Per vendor's website (http://www.weldingwire.com/applications/DocumentLibraryManager/upload/80S-B2.pdf): 80S-B2 is used in welding 1/2 Cr -1/2 Mo, 1Cr - 1/2 Mo, and 1-1/4 Cr -1/2 Mo steels product description on this page describes the 90S-B3 rod, not the 80S-B2 rod

View AllClose