Short Micro TIG Electrodes (Select Diameter From Drop Down Menu Above)
Short 0.475" (12.06mm) Pre-Ground Electrode. For 125C40-90 Chuck & 125N90SQ Low-profile gas cups ONLY! All other Micro TIG torches use 'Long' pregound electrodes.
Made with quality ArcTime™ Hybrid non-radioactive tungsten electrode material for easy arc starting and long tip life.
(Priced Individually, Sold In Packages of 10)
Part # |
Size |
Taper |
125E040S |
.040" (1.0mm) x 0.475" (12.06mm) |
45º |
125E116S |
1/16" (1.6mm) x 0.475" (12.06mm) |
45º |
125E332S |
3/32" (2.4mm) x 0.475" (12.06mm) |
45º |
Set-up Tip:
Weldcraft/Miller W-125 & (WP-125) -- 125C40, 125C40-90, 125C40-45 Chucks -- with 125C40-90 Chuck and 125N90SQ Low-profile gas cups.
To hold securely the tungsten must be cut square on the "back end" & should be flush with chuck as to not disrupt the shield gas flow.