Proportional 2-Gas Argon/Hydrogen, Argon/Oxygen Mixer for Accurate TIG and MIG weld shielding gas mixing. Various welding processes require different gas mixes for the best performance. Our proportional gas mixer provides accurate mixing (±2% of scale), and allows custom mixtures for producing optimal welds. Convenient chart on top provides proper settings for argon/CO2, argon/hydrogen, argon/helium and nitrogen/hydrogen.
Standard dual scale 2-gas mixer built with high-quality components. Controls on front of device allow for easy access and adjustment of mixing knobs. Arc-Zone will gladly handle any recalibration, reconditioning and gas mix certifications. Contact us for pricing and shipping instructions.
Note: Outlet pressure factory set at no flow.
All gases used with mixer must be compatible with Buna-N, Copolymer Acetyl, Nylon and Polyethylene.
Adjustment % Range:
Argon: 50 - 100%
Hydrogen: 50 - 0%
Argon: 80 - 100%
Oxygen: 20 - 0%
Required Inlet Pressure (PSIG/Bar):
105 - 115 / 7.3 - 7.9
Outlet Pressure Without Flow (PSIG/Bar):
Inlet / Outlet Connection:
"B" Size 5/8" x 18 Right-Hand Thread Internal
9/16" x 18 Left-Hand Thread External *(requires Oxygen adapter)
10-180 SCFH / 4.8 - 85.7 LPM
Flow Rate Subdivisions:
10 SCFH / 4.8 LPM
Inlet Filters, Mixer Protection Only:
60 Micron Nominal - PN:3291
8lbs. / 3.5kg
5-1/4" x 10" x 6-1/4" (133mm) x 254mm x 165mm)