MIL-299-006-1C (Replaces SMI-299-006-1B)
Proportional 2-Gas Argon/CO2 mixer. Accurate TIG and MIG weld shielding gas mixing. Various welding processes require different gas mixes for the best performance. Our proportional gas mixer provides accurate mixing (±2% of scale), and allows custom mixtures for producing optimal welds. Convenient chart on top provides proper settings for argon/oxygen and CO2/oxygen.
Standard dual scale 2-gas mixer built with high-quality components. Controls on front of device allow for easy access and adjustment of mixing knobs. Arc-Zone will gladly handle any recalibration, reconditioning and gas mix certifications. Contact us for pricing and shipping instructions.
Note: Outlet pressure factory set at no flow.
All gases used with mixer must be compatible with Buna-N, Copolymer Acetyl, Nylon and Polyethylene.
Adjustment % Range:
Argon: 0 - 100%
CO2: 100 - 0%
Required Inlet Pressure (PSIG/Bar):
105 - 115 / 7.3 - 7.9
Outlet Pressure Without Flow (PSIG/Bar):
50/3.5
Inlet / Outlet Connection:
"B" Size 5/8" x 18 Right-Hand Thread Internal
Specifications:
Flow Rate:
10-180 SCFH / 4.8 - 85.7 LPM
Flow Rate Subdivisions:
10 SCFH / 4.8 LPM
Inlet Filters, Mixer Protection Only:
60 Micron Nominal - PN:3291
Weight:
8lbs. / 3.5kg
Size (WxDxH):
5-1/4" x 10" x 6-1/4" (133mm) x 254mm x 165mm)