Arc-Zone The Metal Mashup April 2018 Vol.2

April 2018: Swap torches w/ zero mess, notch pipes w/ ease, get polished, a talented Bulldog & kickin’ back welding

PRESTO-CHANGO W/ ZERO LOSS

Got >1 TIG torch? Now you can swap-out torches in a Snap. No Tools Required! Never deal w/ excess water, gas or money draining out of TIG lines again. With our Zero Loss Quick-Release System, just snap in the torch you need & you’re good to go. We offer conversion kits for as many torches as you have, so you can literally plug-n-weld all day… We’ve even got torch packages, so get all the #toolsthatmakeyoumoney from Arc-Zone. We’re here to keep that green stuff flowin your way.

ANOTHER NOTCH IN YOUR TUBE

If you weld pipe, you’ll love the new Modular Tube & Pipe Notcher (SHT-ATN100). Complete your 1st notch with a drill press, then use the BuildPro® Notcher to align angles & control the length of the 2nd notch accurately & easily. Position the two soft-facing V-Blocks and clamp as needed.

Nuts & Bolts of it:
  • Notch 1″- 2¹/²” OD pipes or square tubes at any angle
  • Cutter centerline is height adjustable
  • Adjust cutting angle up to 90º
  • Works with 1/2″ Drill
  • Accepts hole saw thread sizes: 1/2″-20, 5/8″-18
  • 25 mm Steel Shaft
  • Double Bearing Block

JUST CAN’T GET ENUF… MULTITOOL

The popular Multitool 2×36 belt grinding attachment is available mated to a 1 hp grinder. More than a traditional belt sander, this versatile tool has a belt speed of approximately 5,400 surface feet per minute which allows for material removal up to 5 times faster, along with 5 grinding areas in one machine. The unit also offers platen grinding, slack-belt grinding, disc grinding, and stone wheel grinding!

Don’t miss the Multitool in action, check-out this video from @moser_fab 
putting this versatile tool the test… Over 300,000 folks watched the video @ our last count. Woot Woot!!

FROM TIG WELDER TO ENTREPRENEUR

Since TIG welding his first Class 8 chassis in 1983, Robbie Pierce was hooked on Motorsports (and making the vehicles safer). This month, he’s acquired Jimco Racing, and says, “Taking over the reins at Jimco Racing just feels like coming home.” He says that this move fits his passion and expertise.
Pierce is an active off-road racer who drives in desert racing’s premiere Trophy-Truck category. Jimco is located in the heart of off-road racing’s “Gasoline Alley” just a short drive from downtown San Diego. A true American success story, Jimco was born out of passion and enthusiasm; eventually seeing its talented craftsmen build and develop more than 500 race cars, trucks and UTVs and hundreds of victories and championships around the world.

“WORK” SMARTER

The folks @world_of_engineering re-posted this video from@ryancj55… and we couldn’t help but share it with y’all. The only thing missing are tunes & some of Ryan’s famous BBQ to help pass the afternoon as he seals up that pipe. Here’s to deploying tools that save you time, let you take a load off, and help you build it bigger & better. Spring flowers & the smell of smoked meats are in the air… Enjoy!

#WELDLIKEAPRO

In 1996, Aaron Biefer (@bulldog_welding) started as a CAD designer in the automotive industry, and later moved to welding engineer. He began welding ~20 years ago to keep his old car on the road. From the very 1st arc with that ol’ Lincoln buzz box, he was hooked. Fast forward to today, he & Kelsey (his Rock ⭐) are engaged and live in an old farm house with Owen & Ben, their two English Bulldogs. The Bulldog Welding “world headquarters” is located in a barn on the property. Aaron, like most of us, has learned a ton from his mistakes as well as from Jody’s Tips and Tricks videos. He attributes his artistic flare for metal sculpture to his mom, an art teacher. Aaron now tackles everything from architectural to heavy equipment repair, and says that he’s driven to become better with every project. We salute Aaron and welders everywhere who pursue their passion each day that they strike that arc.

Share

Leave a Comment

* = Required field