About Flex Head TIG Torches
The flex-head TIG torch allows you to personalize the torch head angle for the welding job, your workstation, and your welding style. To save time and money, you’ll want to follow some simple steps so your torch doesn’t fail prematurely.
Using Your Flex Head Torch for the First Time
We know it’s tempting to start bending your new flexible TIG torch the minute your box arrives from Arc-Zone, but don’t do it without following these instructions.
- To get the most life out of the torch Never bend your torch when it’s cold!
- Heat up the torch body before you flex it by striking a couple of arcs. This will warm up the copper coils inside the torch body and keep them from “work hardening” which will lead to cracked tubes and water or gas leaks.
- Once warmed up, you are ready for bending. The flexible coil area, is generally located between where the handle starts to about 1/2″ before the head.
- Do not twist the torch from side to side. This action will cause the coiled tubes to unwind and most likely twist off the head.
Arc-Zone stocks a complete line of Miller/Weldcraft and CK Worldwide flex-head TIG torches in air-cooled and water-cooled models. Plus, you can Make it a PRO package and get everything you need to weld right out of the box! Add a PRO Accessory kit and you’ll maximize your options for your selected TIG torch.
If you need help making a selection, contact our Customer Care team via email: info@arc-zone.com or call us at 760-931-1500
