Keep a Low Profile with your TIG Welding Torch

Share

Low Profile Upgrade for you TIG welding torchIt’s not just what’s inside your TIG torch that matters (check out our article, “What’s inside your TIG Torch”, it’s what’s on the outside that counts too–sometimes you want to keep a low profile so you can sneak into a tight spot with all the power your favorite TIG welding torch can deliver.

The Stubby Parts Kits will turn your bulky 3 Series TIG torch, your 17, 26, CS300 series air-cooled torch, or your 18 and CS410 water-cooled TIG Torch into an easy-to-handle powerhouse.

When your TIG torch is fitted with our low-profile parts, welding in tight spots will be a breeze. Plus you’ll experience all the benefits of using a gas lens collet body: efficient shield gas coverage and improved weld quality.

The Full Power of Your TIG Torch at Half the Length

With the Stubby Kit, you can reduce the total parts length of your torch by half. Designed to fit 17 and 26 Series Air-Cooled torches and the 18 Series Water-Cooled torches, including Lincoln PTA-17, PTA-18 and PTA-26, Miller Diamondback DB17, DB18, and DB 26, Weldcraft LS-17, WP-17, WP-18, and WP-26 torches, as well as all popular import torches.

Low Profile Front End Parts for your TIG Welding Torch

Your welding machine’s factory torch will be transformed into a small, compact torch ideal for projects like welding tube clusters, welding inside small tubing, and welding tight angle joints (and much more!) while still providing the amperage your big torch was designed to deliver.

Low-Profile Stubby Front End Parts to Upgrade your TIG Welding Torch

The Stubby parts are engineered to shorten your TIG torch’s profile without sacrificing performance. In fact, you will achieve higher-quality welds, improved gas flow, lower your gas usage, and experience optimal weld puddle shielding. And, with the gas lens collet body set up (included with every kit) you’ll experience a cooler running torch and your parts will last longer. The TIG welding nozzle is pink in color and made of alumina, a high-temperature, nonconductive pink ceramic material. Alumina nozzles are great for lower-amperage applications. With the low profile Stubby kit you can get in, and out of a tight spot with a big torch every time.

Low Profile Kit for your TIG Welding Torch

Kit shown here with Ultra High Temperature Nozzles for your TIG welding torch (more info below)

Assembled by the TIG welding experts at Arc-Zone.com, the Low Profile Stubby Kit is the ultimate box of high-performance TIG torch accessory parts with everything you need to amp up your TIG torch for the best weld you can get. The A-3S- Stubby Series Accessory Kit Includes:

  • One Stubby Wedge Collet
  • One Stubby Gas Lens Collet Body
  • Two Alumina (pink in color) Gas Lens Nozzles, #8 = 1/2″ (12.7mm) Orifice x 1″ (25.4mm) Long
  • One Stubby Teflon Heatshield
  • One Medium Back Cap
  • One Short Back Cap
  • One Spare Back Cap O-Ring
  • Two 7” (175mm) Long ArcTime™ Hybrid Non-Radioactive Tungsten Electrodes (select electrode diameter)
  • One Ea. EZ Wipe
  • Durable Parts Box with Lid Card for Easy Re-Ordering

These parts are compatible with all the popular 17, 17V, 18, 18V, 26, 26V, CS410 Series, and 3 Series TIG Torches from Weldcraft, CK, Radnor, BestWelds, Master TIG, Profax, Diamond Back, Lincoln etc.

Never Blow The End Off your TIG Nozzle Again!

Low Profile Front End Parts for you TIG welding TorchFor high amperage applications like welding aluminum try our High Performance Stubby Nozzle Kits. The kit is built around our high-temp Super Cups that are made of a covalent-bonded silica-nitride ceramic material with superior heat resistance, dielectric strength and hardness. Basically that’s a lot of fancy words that mean your nozzle won’t crack in half when running high-amperage AC current– common with aluminum welding jobs.

 

The JW Series Stubby Series Accessory Kit Includes:

  • One Stubby Wedge Collet
  • One Stubby Gas Lens Collet Body
  • Two Super Cups (Gray in Color) #8 = 1/2″ (12.7mm) Orifice x 1″ (25.4mm) Long
  • One Stubby Teflon Heat shield
  • One Medium Back Cap
  • One Short Back Cap
  • One Spare Back Cap O-Ring
  • Two 7” (175mm) Long ArcTime™ Hybrid Non-Radioactive Tungsten Electrodes (select electrode diameter)
  • One Ea. EZ Wipe
  • Durable Parts Box with Lid Card for Easy Re-Ordering

These parts are compatible with all the popular 17, 17V, 18, 18V, 26, 26V, CS410 Series, and 3 Series TIG Torches from Weldcraft, CK, Radnor, BestWelds, Master TIG, Profax, Diamond Back, Lincoln etc.

Share

Leave a Comment

* = Required field