null
Huntingdon Fusion

Cast Aluminum Expansion Plugs from 1-1/2" (38mm) - 36" (914mm)

(1 review) Write a Review
MPN:
AP0150
Minimum Purchase:
1 unit
$26.50 - $1,805.00

Description

Cast Aluminum Expansion Plugs

Cast Aluminum Expansion Plugs are used to create barriers for pipes and tubes; and for creating an air-tight seal to purge short-length tube assemblies. To ensure proper fit for your application, choose the plug size that fits your job.  Sizes from 1.5” (38 mm) to 36” (914 mm).

Cast aluminum plugs are quick and easy to install and use a wing nut that expands the rubber seal when placed in the pipe and tightened.

  • Maintenance free and made of heavy-duty, non-corrosive cast aluminum with a natural rubber seal for a precision fit.
  • Pipe stems vary in diameter, according to the plug sizes and can be solid or with a vent.
  • Pipe stems are threaded and have a removable cap. They vary in sizes ranging from 0.5 (13 mm) to 2” (50 mm).
  • Pressure Rating: Up to 8" (203mm) about 9 PSI. 8" or larger reduces the PSI.

Example:  A 30" (762mm) Plug would only handle about 3 PSI.

Convert PSI to Bar (European): 14.5 PSI equals 1 Bar.

Part # Nominal Size Min. Size Max. Size Stem Size Weight
PGE-AP0150 1-1/2" 1.456" 1.899" 1/2" 0.5 lbs.
PGE-AP0200 2" 1.889" 2.44" 1/2" 0.5 lbs.
PGE-AP0250 2-1/2" 2.440" 2.775" 1/2" 0.5 lbs.
PGE-AP0300 3" 2.795" 3.425" 1/2" 0.75 lbs.
PGE-AP0350 3-1/2" 3.503" 3.700" 1/2" 1 lbs.
PGE-AP0400 4" 3.779" 4.133" 1/2" 1 lbs.
PGE-AP0450 4-1/2" 4.251" 4.724" 1/2" 1 lbs.
PGE-AP0500 5" 4.842" 5.393" 1/2" 1.5 lbs.
PGE-AP0600 6" 5.900" 6.550" 1/2" 1.5 lbs.
PGE-AP0700 7" 6.550" 7.300" 1" 3.2 lbs.
PGE-AP0800 8" 7.700" 8.550" 1" 3.4 lbs.
PGE-AP0900 9" 8.200" 9.100" 1" 3.9 lbs. 
PGE-AP1000 10" 9.200" 10.250" 1" 4.5 lbs.
PGE-AP1100 11" 10.300" 11.200" 1" 4.9 lbs.
PGE-AP1200 12" 11.350" 12.450" 1" 6.7 lbs.
PGE-AP1400 14" 13.800" 15.100" 1" 11 lbs.
PGE-AP1500 15" 14.350" 15.800" 1" 11.3 lbs.
PGE-AP1600 16" 15.600" 17.000" 1" 13.8 lbs.
PGE-AP1800 18" 17.450" 19.250" 1" 17 lbs.
PGE-AP2000 20" 19.150" 20.650" 2" 30 lbs.
PGE-AP2100 21" 20.650" 22.100" 2" 22.7 lbs.
PGE-AP2400 24" 23.550" 25.500" 2" 33 lbs.
PGE-AP2700 27" 26.250" 27.700" 2" 44 lbs.
PGE-AP3000 30" 29.250" 31.000" 2" 60 lbs.
PGE-AP3200 32" 31.102" 34.480" 2" 59 lbs.
PGE-AP3600 36" 34.500" 36.800" 2" 96 lbs.

 

View AllClose

Additional Information

Product Type:
Purge Plug
View AllClose

1 Review

  • 3
    Not bad. They secure well but forget about using…

    Posted by DAVID T. on Feb 11th 2017

    Not bad. They secure well, but forget about using them to purge into. The cast aluminum is rough, and the threaded stud uses an oddball diameter/thread pitch that I have yet to find a way to adapt a quick connect to in order to blow argon through it. They come with a threaded plastic cap, which I remove and replace with some painters tape and pop a small hole to purge out of on the other end of the line.

View AllClose