Back To Top
Frequently Bought Together
Back to Top
Customers Also Purchased
Customer Reviews
- 5 star 10
- 4 star 1
- 3 star 0
- 2 star 1
- 1 star 0
Average Customer Rating for:
Arc-Zone Pro Analog 110lb Capacity Positioner 0.5 - 8 RPM
(12) 4 out of 5 stars
See All 12 Customer ReviewsAdded: 12/05/2021 by Gregory M.
Excellent quality, highly recommend for any welder/fabricator. Cut my fabrication time down tremendously. Highly recommend getting the purge kit as well. Amazing product all around 10/10
Arc-Zone:
Gregory,
Thanks for taking time to write a review! Good to hear the Positioner & Purge Manifold Kit works for you.
Good welding!
Gregory,
Thanks for taking time to write a review! Good to hear the Positioner & Purge Manifold Kit works for you.
Good welding!
Added: 01/17/2019 by William F.
Meets all expectations, except one. didn't care for the ground cable. you have to buy a ground clamp. I bought a ground clamp with lug for permanent installation. stored the dinse connectors. machine works good.
Arc-Zone:
Thank you, William - That's the first time we've had that feedback on the dinse ground connection. We'll keep it in mind as we build out more options for the Positioner.
Thank you, William - That's the first time we've had that feedback on the dinse ground connection. We'll keep it in mind as we build out more options for the Positioner.
Added: 09/25/2018 by JAMES W.
doesn't rotate slow enough. at very low RPMs wear something of this size should be operating on small parts it is inaccurate and unable to sustain the slow rotation.
Arc-Zone:
Thank you for the feedback, James. The machine rotates from .04 -to- 10 rpm, and it's extremely smooth and consistent. . . That's pretty slow for a machine with a table plate that size. If you want a slower speed, you will need to step up to a larger machine like our WP-250 it has a rotation speed of 0 -to- 5.5 rpm.
Thank you for the feedback, James. The machine rotates from .04 -to- 10 rpm, and it's extremely smooth and consistent. . . That's pretty slow for a machine with a table plate that size. If you want a slower speed, you will need to step up to a larger machine like our WP-250 it has a rotation speed of 0 -to- 5.5 rpm.
Added: 05/30/2018 by Nick M.
Top notch! Great turn table for small parts! Being able to weld continuosly around a part not only makes it look nice but speeds up the welding process as well.
The way the ground to the turning base is designed is way better than some on the next size up models. I had no fear that I was going to heat the unit it up with constant work.
Only thing that I found that limited me was anything larger than 3-4” it seemed like it wouldn’t turn slow enough to weld.
All n all a great well built turn table. Check out some work I did with it on Instagram @Mishler_made_fab
The way the ground to the turning base is designed is way better than some on the next size up models. I had no fear that I was going to heat the unit it up with constant work.
Only thing that I found that limited me was anything larger than 3-4” it seemed like it wouldn’t turn slow enough to weld.
All n all a great well built turn table. Check out some work I did with it on Instagram @Mishler_made_fab
Added: 02/01/2018 by Wes M.
I've run this machine for weeks now... VERY impressed. Well built and very easy to use. It's perfect for small weldments and the price tag is on point. If you're looking for a machine like this, look no further. You will not be disappointed.