Plasma Cutting Guide With Bushings (Select Bushing Size From Drop Down Menu Above)
The PG-601 Plasma Cutting Guide is a must for every tradesmen who uses a plasma cutting torch. Pick the right bushing for your plasma, adjust the tool for the hole size you need and It will cut circles from 5/8" up to 36" in diameter.
The versatile Plasma Cutting Guide also cuts straight lines and irregular shapes by utilizing the wheels included with the tool. The Plasma Cutting Guide gives the operator precise control.
Wheels should be removed when cutting holes 5/8" to 8" in diameter.
Accessories: 15-1/2" Extension hex arm (p/n 3311-EX) is available for larger jobs. Magnetic Base (ferrous plate) with Suction Cups (non-ferrous plate) (p/n 77350) serves as an extra stabilizer when cutting large holes. (WARNING: Never use the magnetic base or suction cups when cutting small holes. The heat will damage the magnets or the rubber suction cups.)
Plasma Bushing Chart:
Part Number |
Torch Head Diameter |
Manufacturer |
Torch Model Number |
FWZ-PG-601-1.007 |
0.750" - 1.005"
(19.05mm - 25.53mm) |
ESAB |
250, 380, 650 |
Hypertherm |
Air T30, Duramax, Duramax HRT(s)(2), Duramax LT/MRT/RT, PAC105, PAC110, PAC120, PAC121, PAC123, PAC125, PAC140, RT60, RT80, T100, T30V, T45V, T60, T80 |
Miller |
ICE-27 |
Thermadyne |
SL-40 |
FWZ-PG-601-1.070 |
1.030" - 1.068"
(26.16mm - 27.13mm) |
Hypertherm |
PAC130, PAC160 |
Miller |
ICE-40C/T, ICE-50C, ICE-55C, ICE-60T, ICE-80T, Spectrum 875 |
FWZ-PG-601-1.200 |
1.069" - 1.195"
(27.15mm - 30.35mm) |
ESAB |
900, 1300, 1600, PT-27, I-750, I-1000 |
Hypertherm |
PAC135 |
Lincoln |
LC-25, LC-40 |
Miller |
Spectrum 500, 750, XT-30C, XT-40 |
Thermadyne |
SL-60, SL-100, RPT-100, Drag-Gun, Cutmaster 50, 52, 100, 102, pch-42 |
FWZ-PG-601-1.275 |
1.199" - 1.270"
(30.45mm - 32.26mm) |
Hypertherm |
Powermax 1100, PAC135 |
Lincoln |
Lincoln 125, PGT 125 Torch |