null
Arc-Zone Pro

Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled

(9 reviews) Write a Review
MPN:
JWS-MDCK-D
Minimum Purchase:
1 unit
  • Arc-Zone Pro Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled
  • Arc-Zone Pro Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled
  • Arc-Zone Pro Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled
  • Arc-Zone Pro Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled
  • Arc-Zone Pro Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled
  • Arc-Zone Pro Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled
  • Arc-Zone Pro Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled
  • Arc-Zone Pro Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled
  • Arc-Zone Pro Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled
  • Arc-Zone Pro Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled
  • Arc-Zone Pro Miller® Diversion TIG Torch Upgrade Kit / Air-Cooled
$139.00 - $713.47

Description

Enjoy the benefits of a high-performance Air-Cooled TIG torch on your Miller® Diversion™ 165, 180 & Hobart® EZ-TIG 165i with our Easy-to-Install Update Kit!

Update the Power, Gas and Work Lead (ground) connections on your Miller Diversion machine and benefit from improved performance and greatly expand your welding machines capabilities and performance.

Miller® Diversion machines come from the factory with a direct mount 17 (3 series) 12.5' (3.8m) TIG torch that is bulky and cumbersome to handle greatly reducing your ability manipulate the torch and control the weld puddle - which is critical to high-quality TIG welding.

What's more the work lead (ground cable) is "hard-wired" to the machine, which limits the type of ground clamp you can use, and the length of the cable.

The JW Signature Series Upgrade Kit makes it easy for you to install -- the most popular -- Large (50mm Dinse) Dinse style TIG Power and Work Lead connectors to the cace of your machine.

The conversion is simple, and can be done in a few minutes with our complete upgrade kit and standard shop tools.

JWS-MDCK-D Kit Includes:

  • 1ea. Female Dinse Panel Mount (black) TIG Torch Receptacle
  • 1ea. Female Dinse Panel Mount (red) Work Lead Receptacle
  • 1ea. Male Dinse (red) Work Lead Connector
  • 2ea. Hole Saw Guide Bushings
  • 1ea. 30mm Hole Saw
  • All related mounting hardware and accessories

*Air-Cooled TIG Torch connector sold separately

Complete Your Upgrade with a New TIG Torch (Select from Options Above)

Torch Model Torch Series & Amperage Rating Power Cable Machine Power Connector Cable Cover Torch Accessory Parts Kit
CK-9 FX
Flex-Head
9 (2 Series) Air-Cooled 125 Amp 25' (7.6m) Single Piece SuperFlex Installed on TIG Torch No AK-1-PRO
CK-17 FX
Flex-Head
17 (3 Series) Air-Cooled 150 Amp 25' (7.6m) Single Piece SuperFlex Installed on TIG Torch No AK-3S-Pro

***Important Note:  The power cable for the CK-9 FX torch package option will work with the WP-17 Torch/Handle that came with your Miller Diversion machine.  Simply slide the handle back and unthread the torch body from the power cable.  This will allow you to keep and use all of your existing front end parts.

Upgrade Installation Video

Installation Instructions:

  • Step #1. Turn Off Machine's Power Switch and UNPLUG THE POWER CORD!
  • Step #2. Remove the machine cover, factory-installed TIG Torch and work lead connector and strain relief(s). Save the covered Work Lead cable with Eyelet Connector.
  • Step #3. Cut the covered Work Lead (opposite the Eyelet Connector) so you have 12" of work lead cable. This will be your new Internal Work Lead connection to the (red) Panel Connector.
  • Step #4. Strip the end of the covered Work Lead (opposite end of the Eyelet Connector) and connect the Arc-Zone supplied 45 degree angle connector.
  • Step #5. Using the Arc-Zone supplied hole saw drilling kit, enlarge the two existing holes in the machine's front panel to 30mm.
  • Step #6. File a 1/4" x 1/4" (6.4mm) "keyway" relief into the enlarged the 30mm holes (it's best to locate each relief at the "6 o-clock" position) on the chassis of your machine. This allows the New Female Panel Receptacles to nest properly and keeps them from rotating. If you do not perform steps 5 & 6, you could have the Welding current in direct contact with the machines chassis.
  • Step #7. Disassemble the Black and Red panel Mount Receptacles and insure that they fit into the holes on the machines front panel.
    Note: There is an insulator for the inside and outside of the machine chassis, and both have a 1/4" (6.4mm) notch that must be lined up during assembly.
  • Step #8. Install TIG torch panel mount connector, (Black) into Upper Hole in machine face, with flat and lock washer so as to sandwich the machine’s power eyelet. Tighten as needed.
  • Step #9. Install Work Lead panel mount connector, (Red) into Lower Hole in machine face. Tighten as needed.
  • Step #10. Tighten the Work Lead eyelet connectors to the mother board and the Lower (Red) Panel Connector.
  • Step #11. Verify that all connections are tight and Re-install the machine cover.
    Complete your upgrade with a new high-performance TIG torch! Select the torch and amperage that best fits your application.

Enjoy your upgraded Diversion, and good welding!

Want to upgrade to water-cooled? Give us a call today!

Want even better performance? Upgrade your Foot Pedal to an SSC-C810-0814 (Select from Drop Down Menu Above)

*WELDING MACHINE NOT INCLUDED*

View AllClose

Additional Information

TIG Products:
Power Connectors
Machine Connection:
Miller Diversion
View AllClose

9 Reviews

  • 3
    The upgrade was easy. The female Dinse panel…

    Posted by William F. on Aug 20th 2021

    The upgrade was easy. The female Dinse panel mount (red) work lead receptacle or the male Dinse (red) work Lead connector included in kit has poor manufacturing tolerances. The connection was extremely loose. Web site did not show which SafeLoc water-cooled DINSE connector or water cooled TIG Torch to order with upgrade kit. Video on web site was not complete and nothing on converting the Hobart 165i.

  • 5
    Very nice kit. Make sure you get the connector…

    Posted by James H. on Apr 2nd 2021

    Very nice kit. Make sure you get the connector for your new torch. Easy conversion. Also upgrade to another foot pedal.

  • 4
    Awesome upgrade however I wish they had…

    Posted by Michael J. on Sep 20th 2020

    Awesome upgrade, however, I wish they had immediately presented you with option to purchase the right size torch dinse adapter needed to complete the conversion, otherwise great stuff.

  • 5
    This is a great upgrade for Diversion welders.…

    Posted by Jesse D. on May 20th 2020

    This is a great upgrade for Diversion welders. Video was really helpful, but would love to see more complete instructions, especially regarding removal of old torch and control switch.

  • 5
    Really slick kit. Great instructions high quality…

    Posted by Anuthee H. on Apr 28th 2020

    Really slick kit. Great instructions, high quality pieces, absolutely fantastic!

  • 5
    Great upgrade to the Miller Diversion 180. I have…

    Posted by matt h. on Dec 12th 2019

    Great upgrade to the Miller Diversion 180. I have done all 3 machines in shop with it. Makes switching leads easy and fast plus easier to find new hose for. Stock one was built in machine.

  • 5
    This is an awesome upgrade very simple easy…

    Posted by Justin C. on Aug 13th 2019

    This is an awesome upgrade, very simple easy install and opens the machine up to a lot more possibilities. This is a great upgrade.

  • 3
    The kit came with a 27 mm hole saw and not a 30…

    Posted by Larry T. on May 21st 2018

    The kit came with a 27 mm hole saw and not a 30 mm as needed which left me with a lot of filing and fitting.

  • 5
    Works perfectly! What a good idea this was; took…

    Posted by bernie k. on Sep 8th 2017

    Works perfectly! What a good idea this was; took me about 35 min to install. Looks like it came from factory that way. Thank you Randy and Arian for such good service. I get my orders in TX quick.

View AllClose