Miller® Diversion™ 165, 180 & Hobart® EZ-TIG 165i Air-Cooled TIG Torch Update Kit
Upgrade your TIG welding machine to the benefits of a high-performance Air-Cooled TIG torch! Miller® Diversion machines come from the factory with a "hard-wired" power cable connection. The OEM TIG torch is bulky and cumbersome which greatly reduces the machines versatility, performance, and your ability to comfortably manipulate the torch which is critical to high-quality TIG welding.
- Precision Machined Brass Power/Gas Connector
- Silicone Bronze Lock Washer
- Brass Flat Washer
- Stainless Steel Gas Hose Clamp
Step #1. Turn Off Machine's Power Switch and UNPLUG THE POWER CORD!
Step #2. Remove the machine cover and factory-installed TIG Torch. Save the brass locking nut, plastic cable strain relief and chassis insulator with the nut.
Step #3. Re-install the strain relief and chassis insulator with nut, and tighten to machine chassis. Slip the new TIG torch cable through the strain relief and chassis insulator.
Step #4. Connect the Arc-Zone supplied Upgrade Kit (power fitting with hose barb, flat and lock washers) to torch power cable fitting.
Step #5. Re-Install brass locking nut to the supplied power fitting with hose barb, flat and lock washer to machine’s power eyelet. Install gas hose and tighten hose clamp.
Step #6. Tighten the strain relief to hold the TIG torch power cable in position after all the internal connections are made. Re-install the machine cover. Tighten the plastic strain relief only enough to hold the cable without restricting gas flow.
Enjoy your upgraded Diversion, and good welding!
Want Even Better Performance? Upgrade your Foot Pedal: SSC-C810-0814
Complete Your Upgrade with a New TIG Torch
CK Rigid Torch Models:
CK-130 - 2 Series, 130 amp Air-cooled
CK-150 - 3 Series, 150 amp Air-cooled
CK Flexible Torch Models:
CK-130 FX - 2 Series, 130 amp Air-cooled
CK-150 FX - 3 Series, 150 amp Air-cooled
CK Flex-Loc Articulating Head Torch Models:
CK-FL130 - 2 Series & CK-FL150 - 3 Series Flex-Loc Air-Cooled