In college, if you major in English, you get to write a paper.  A drama major will act in a play.  And a welding major?

Well, he might just get to weld an elephant…

Sculpted elephant shows tradesman’s artistic flair

By Kristi O’Harran
Herald Columnist

The circus is coming to Camano Island.

Well, not the whole ring and tent, just a fanciful retired elephant.

James R. Shields III, who grew up on the island, fabricated the pachyderm at Everett Community College.

She’s a beauty — in metal.

“Elly started with a three-way, 4-inch pipe fitting that looked like the beginnings of a trunk, and grew into a partial head when the body showed up,” Shields said.

The body is a working air compressor tank from the 1940s that was bound for the college scrap pile.

From there, pipe fittings made the legs, thanks, Shields said, to Rick Brydges, who teaches pipefitting. Fittings were also welded to make the legs and trunk.

The spine and tail are fashioned from rebar.

“I got to use 350 pounds of scrap welding wire, and spent more than 200 hours, to make Elly,” he said. “She will be on display at Freedom Park at Terry’s Corner on Camano Island.”

Elly has bright eyes, tusks and a trumpeting trunk on a wrinkled body that truly looks like elephant hide.

Children can climb aboard when they go on safari.

CONTINUE READING ONLINE ->

Did you know what you wanted to do for a career when you were a freshman in high school?  I didn’t!  I don’t really know anyone who did — isn’t that what college is for?

Lyndsi Tingle did.  She wanted to be a welder, and she and her teachers agree — she’s on the right track to succeed.

Frankfort Face: She makes sparks fly

By Katheran Wasson

Lyndsi Tingle wore men’s welding gloves for three years before she realized they made smaller pairs for women.

The 17-year-old Western Hills High School senior welds, cuts and bends metal alongside the boys at Franklin County Career and Technical Center.

She spends four hours a day in tan Carhartt overalls and a T-shirt, safety goggles propped on her blonde head.

“Most of the guys kind of look at me as mama,” she said, sitting in the workshop before winter break.

“If something needs to be done, they know that I’m going to be on them to do it.”

Lyndsi has known since freshman year that she wanted to make a career out of welding.

After graduation, she and five of her classmates will head to Tulsa Welding School in Jacksonville, Fla., to study the craft.

She hopes to eventually become an inspector, checking the welds on bridges, power plants and pipes to make sure they are secure.

CONTINUE READING ONLINE ->

It appears that wood and plain-old steel just aren’t cutting it any more.  No, for furniture with built-in character, try making it out of your old rusted-out cars!

Furniture from Old Car Parts? Yep.

By Jaime Derringer
Dec 8th 2009

Joel Hester’s love affair with old and vintage metals began two years ago.

A client brought him a small metal beer sign that he wanted to use as a top for a coffee table. Joel, who lives in Dallas, Texas, knew a little something about making furniture from unexpected materials; he was already welding steel into custom bed frames.

So he made the coffee table — and then got an idea. Why not start a business? He’s since developed a passion for making custom furniture out of old cars. He calls it The Weld House.

But why cars? Well, when he received the client’s beer sign, he wondered how he could make it work since the sign wasn’t large enough to wrap the top of the table for a smooth, seamless surface.

So, after over a month of struggling with the process, Joel ended up wandering through a junk yard looking for scrap metal that might work with the beer sign.

“I turned a corner and saw an old Cadillac,” he says. “Its large trunk was the coolest mixture of color and patterns. I knew I could skin the metal off the structure of the trunk and use it to wrap the top of the table.”

Joel instantly forgot about the beer sign and called his client proposing a new, different idea of how to create the table: an old car!

CONTINUE READING ONLINE ->

It’s midnight at a community college in Oregon.  The classroom is brightly lit, and the students are up and about and… welding?

Thanks to a new series of “graveyard” welding classes, this has become a regular feature of several area colleges.

In the Midnight Hour

By David Moltz
December 9, 2009

Midnight classes, once a quirky scheduling option available at only a few institutions, are gaining currency at a growing number of community colleges as student demand for specific courses increases and available classroom space for those courses decreases.

Photo: Carl Graham / Clackamas Community College

Though it is unclear which institutions pioneered the idea, Clackamas Community College, in Oregon, began offering what became known as “graveyard welding classes,” lasting from 10 p.m. to 2 a.m., two nights a week last spring.

The classes were so popular that the college expanded them to four nights a week this fall, and students can now take five different welding courses during the “graveyard shift,” ranging from an introductory section to those focusing on specialized projects.

John Phelps, one of two adjunct welding instructors who lead the late-night courses, said the college’s experiment with these sections was a matter of necessity.

Even with some welding sections available on the weekends, he said, the college reached its capacity for these courses last fall and was forced to turn away a number of students.

CONTINUE READING ONLINE ->

Students at Norwood District High School are getting into the Christmas spirit by, you guessed it, welding.  This year, the senior class is helping out by manufacturing 22 metal stars that will decorate their town during this holiday season.

NDHS students will make Christmas brighter this year

Posted By Sue Dickens for The Community Press

Norwood – Stars will be shining a little bit brighter over Hastings this Christmas thanks to the talent and hard work of students in the manufacturing program at Norwood District High School (NDHS).

“We can’t thank them enough,” said Stephen Roddy, chair of the Hastings Revitalization Association(HRA), the organization that asked for the school’s help on the project.

For the Grade 12 students it’s all about giving back to their community and testing their metal so to speak as they weld and solder frames for 22 stars that will be placed on hydro poles in Hastings just in time for the holiday season.

“You couldn’t ask for better quality. I’ve been to the school and I am amazed at the workmanship of these students. And their teacher Tim Ellis has been a guiding light in all of this,” Roddy said.

CONTINUE READING ONLINE ->

What are you welding for the holidays?  Share your ideas and pictures with us!